Call UsCall Us :

Flooring

Product Image (S01)

EPOXY FLOORING

Excellent Gloss Abrasion resistant Attractive, brightens up dull factories and warehouses Hard-wearing Solvent free Low odor Seamless and hygienic finish

Product Image (S05)

3D FLOORING

Why install a 3D flooring system? 1. It’s Affordable! At Harness, our luxury metallic floors are actually cheaper than most other Indian epoxy flooring contractors charge for traditional decorative flake epoxy floors and stained concrete floor systems. We have a proven a system that is not only cost effective, but still has the ultra-strength of industrial epoxy floors. 2. Certified Installation! Install a metallic epoxy floor takes special skill from a certified epoxy flooring contractor. We are the leading metallic epoxy flooring contractor not only in Ahmedabad, but also in whole India. 3. Amazing & Truly Custom Results! The effects achieved with metallic epoxy cannot be duplicated with any other coating methods. 3D Flooring’s reflects light and gives the finished floor more dimension and depth than a concrete stain. 3D Flooring’s gives you the “Wow!” factor that you always wanted. Take a look at some of 3D flooring finishing below. This brand-new high-tech flooring system is truly amazing and there is nothing like it in India. Once again, our team of certified metallic epoxy custom installers can put the same high-end flooring system in your basement, garage, business or factory floor.

Product Image (S03)

EPU FLOORING

Mechanical resistant Chemical resistant Seamless Sealing pores Water impermeable Non-slip surface Wide range of colours Easy to clean

Product Image (S04)

METALLIC FLOORING

Made of 100% solids epoxy with metallic pigments added, this self-levelling epoxy coating is designed to be manipulated to create the different visual effects. Once applied to the floor, various solvents such as denatured alcohol can be applied to diffuse and move around the metallic pigments in the epoxy. This is what can create the look of flowing rivers and spots of fractured looking molten metal that sits upon the surface of the coating. Some products are also designed to be worked with an air nozzle or leaf blower to create 3D effects like moon craters, rolling waves, and pudding ripples. Two-tone effects can also be created with the introduction of a second colour at the time of application. Are Metallic Epoxy Floors Durable? As beautiful and stunning as these floors look, they are considered a high-performance floor coating that is designed to last for years. For the first coat they require an epoxy primer to be installed. The second coat involves the actual metallic epoxy coating followed by a third coat of clear on top. It’s not unusual to add a fourth coat if applying polyurethane as a top coat. As a result, you end up with a very thick coating due to the number of coats involved, especially from the metallic coat.

Product Image (S02)

PU COATING

Excellent Abrasion resistant Thin coat, Economical Semi gloss & matt finish Chemical resistant Fast return to service

Product Image (S06)

ESD FLOORING

Price: 70/Sq Foot INR/Square Foot

Electro statically conductive Hard wearing resistance High chemical resistant Good abrasion resistant

Product Image (S07)

ULTRA CLEAR EPOXY

Product Description: Easy to obtain beautiful, glossy results whether you’re a professional or it’s your first time using epoxy. High viscosity epoxy resin coating cures at room temperature. Cures without bubbling. Cures to 100% waterproof, clear, deep glass-like finish on Bar, Table, Counter Tops, Jewellery & Craft, Lamination, Art and Casting. Resists Scratches, Stains, and Yellowing. Specifications: Application temperature: Apply only in temperatures between 25-27 °c. Warm conditions are critical for Mix ratio by Wight: 2 Part Resin to 1 Part Hardener Flood coat application(s): Pour on and spread with an epoxy Flood coats should be no thicker than 25 mm. Working time: 40 minutes @ 25°c Gel time: 60 minutes @ 25°c Cure time: 10-12 hours @ 25°c Product Colour: Table Top Epoxy Resin (clear), Hardener (clear) Cured Colour: Clear Handling Properties: DESCRIPTION UNIT VALUE TEST METHOD Resin Density at 25 g/mL 1.12 ASTM D1475 Hardener Density at 25 g/mL 0.88 ASTM D1475 Resin Viscosity at 25 cPs 3000 ASTM D2196 Hardener Viscosity at 25 cPs 50 ASTM D2196 Calculated Mix Ratio by Wight 2 Part A : 1 Part B Calculated Mixed Viscosity at 25 cPs 1500 ASTM D2196 Gel Time at 25 , 150g mass Min. 60 ASTM D2471 Specifications: Application temperature: Apply only in temperatures between 25-27 °c. Warm conditions are critical for Mix ratio by Wight: 2 Part Resin to 1 Part Hardener Flood coat application(s): Pour on and spread with an epoxy Flood coats should be no thicker than 25 mm. Working time: 40 minutes @ 25°c Gel time: 60 minutes @ 25°c Cure time: 10-12 hours @ 25°c Product Colour: Table Top Epoxy Resin (clear), Hardener (clear) Cured Colour: Clear

Product Image (S08)

SELF LEVEL EPOXY

Benefits & Usage Because it is extremely durable, scratch and slip resistant, and long lasting, epoxy floor paint is the ideal flooring for a wide variety of types of applications. For example, epoxy flooring is ideal in aircraft hangars, warehouses, manufacturing plants, distribution facilities, processing plants, commercial kitchens, animal and pet care environments, healthcare facilities, and more. Our durable epoxy floor paint offers: Excellent Gloss Abrasion resistant Attractive, brightens up dull factories and warehouses Hard-wearing Solvent free; low odour Seamless and hygienic finish

Product Image (S09)

COMMERCIAL FLOORING

Benefits & Usage Car Dealerships and Auto Showrooms Boat & RV Showrooms Commercial Garages Residential Garages Commercial Kitchens, Food Preparation Areas, & Restaurants Hospitals & Medical Offices Kennels, Animal Hospitals, Groomers, and Veterinary Clinics Retail Stores and Shopping Centers Office Buildings Gym Floors & Gymnasiums Dance Studios & Dance Floors Schools & Colleges Public Restrooms & Locker Rooms

Product Image (S10)

DECORATIVE FLOORING

Decorative flooring is extremely popular today due to its wide range of advantages and designs. Decorative floors bring warmth and timeless beauty to your house; its reliability and durability are undisputed Product Description: Easy to obtain beautiful, glossy results whether you’re a professional or it’s your first time using epoxy. High viscosity epoxy resin coating cures at room temperature. Cures without bubbling. Cures to 100% waterproof, clear, deep glass-like finish on Bar, Table, Counter Tops, Jewellery & Craft, Lamination, Art and Casting. Resists Scratches, Stains, and Yellowing. Specifications: Application temperature: Apply only in temperatures between 25-27 °c. Warm conditions are critical for Mix ratio by Wight: 2 Part Resin to 1 Part Hardener Flood coat application(s): Pour on and spread with an epoxy Flood coats should be no thicker than 25 mm. Working time: 40 minutes @ 25°c Gel time: 60 minutes @ 25°c Cure time: 10-12 hours @ 25°c Product Colour: Table Top Epoxy Resin (clear), Hardener (clear) Cured Colour: Clear Handling Properties: DESCRIPTION UNIT VALUE TEST METHOD Resin Density at 25 g/mL 1.12 ASTM D1475 Hardener Density at 25 g/mL 0.88 ASTM D1475 Resin Viscosity at 25 cPs 3000 ASTM D2196 Hardener Viscosity at 25 cPs 50 ASTM D2196 Calculated Mix Ratio by Wight 2 Part A : 1 Part B Calculated Mixed Viscosity at 25 cPs 1500 ASTM D2196 Gel Time at 25 , 150g mass Min. 60 ASTM D2471 Mixing and Handling: Combine the epoxy resin (Part A) and hardener (Part B) at the specified mix ratio of 2 to 1 by weight mix for 3-5 minute until mixture is blended thoroughly. Take care when mixing not to entrain excessive air in the mixture. Always use clean, dry tools for mixing and applying. A few minutes after the coat is applied bubbles will rise to the surface. A propane torch held one inches above the surface of the epoxy resin may be used to break bubbles by slowly sweeping the torch back and forth over the surface until bubbles disappear. Storage: Store at 15 – 32 °c in a dry place after use, tightly reseal all containers. Store products on a raised surface off the floor during cold weather and avoid storing near outside walls or doors.

Product Image (S11)

Decorative House Interior Things

HARSIDDHI INDUSTRIES Offers Custom Services. We undertake Custom Sizes on our existing designs. We also do complete custom furniture. We can provide design services to the clients for any custom furniture We can develop any design using ideas or inspiration, Sketched by our designers which can be developed by full scale drawings to complete your concept.

X